Lunafreya's Trident - Final Fantasy XV

90 (likes)
14355 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

Lunafreya Trident from Final Fantasy XVThis was modelled to fit onto a 42mm/1.66 inch pipe, though the example in the image is using a 40mm pipe, built up with tape to the required thickness. With the pipe/shaft at 3ft 4 inches/40 inches, the trident is around 6ft 8 inches/80 inches long.The tail section is designed to include 3mm thick rods for extra strength and alignment. 1 rod at 327mm long, and 2 at 149mm long.If you would prefer to scale it down for a smaller diameter pipe, I would recommend testing the scaling with "High Sleeve 2" which is the shortest print of the shaft mounted parts.Some notes:- All 11 head parts must be printed twice for the mirrored side.- Both "Tail Spike" files needs to be printed twice.- "Side spike" contains both halves of 1 spike. Needs to be printed 3 times total.I printed at 0.2mm, 10% infill, for a total print time of 109 hours, and 480 metres of filamentCredit as @MarkStanton89 on Instagram/Twitter

About the author:
MSDesign
Self taught 3D modeler and designer. Experienced custom painter Twitter: @MarkStanton89 Instagram: MarkStantonDesign

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.