TTB-MRLP - Model Rocket Launch Pad

92 (likes)
13546 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

A 3D printed model rocket launch pad built to last! With an adjustable leg for leveling and/or aiming your rocket into the wind. Designed for use with standard 1/8" or 3/16" (Maxi) sized rod for fun with ALL sized rockets. The Main leg needs printed 2x and only 1x of the other pieces for a complete launch pad. Very little hardware will be required to finish this launch pad.* BOM-A)1x- 1/8"  x 24" rod B)1x- 3/16" x 48" rod (optional)C)1x- 1/4" Keyless ChuckD)2x- 1/4-20 x 1" bolt (hex or allen cap)E)1x- 1/4" ID nylon washerF)1x- 1/4-20 nylon insert lock-nutG)1x- 3mm x 0.5mm x 20mm bolt (hex or allen cap)H)1x- 1/2" OD toothed lock-washer (min. 3mm ID)I)1x- 1/2" OD fender washer (min. 3mm ID)J)1x- 3mm x 0.5mm wing-nutK)1x- large tin can lid (coffee cans size ideal)L)3x- 1/4-20 x 3 1/2" bolt (hex or allen cap) (optional)M)3x- 1/4-20 nylon insert lock-nut (optional)N)3x- 1/4" ID split-lock washer (optional)O)3x- 1/4" ID flat washer (optional) **Note- Optional hardware for bolting launch pad together, otherwise the launch pad snaps together and may be glued for permanent installation.

About the author:
GlutenFree
I think. I explore. I create. I make things. I break things. I fix things.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.