Satellite Adjustment Tools

0 (likes)
2311 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

This project came to me because i didn't want to pay and Satellite Company $150 to install a dish for me. so i went to the local Harbor Freight and purchased a Digital Angle Gauge. Once got that i had to come up with a way to adjust the Dish. So this project is for those people who have or use the Large Satellite Dishes. Once i added the printed items i was able to zero in on the satellite and get over 75% signal strength. The Satellite Level Adjuster goes on the Mast Elevation Arm. Once you get the Elevation with your Angle Gauge use the extended platform and Place your compass on the Level Adjuster and turn the dish in the correct Azimuth. Once that is done place the Sat-Rec-Mount on the LNBF and Skew it to correct Skew. I taped on a piece of metal on the Sat-Rec-Mount so the Angle Gauge will stick to it.

About the author:
tlmxcpmpp
I just started printing april of 2017. Been a Cosplay peron for alot longer. I got into 3D Printing because i've spent weeks if not months building Comic-Con and Cosplay props. Since i got into 3D Printing i've made, designed and printed all my Comic-Con parts. I use to buy my 3D Printers from eBay. In fact my first 4 were from eBay. 1st TronXY x1 with a print bed of 150x150x150 2nd Tronxy P802a with a print bed of 220x220x300 3rd Kossel Delta with a print bed of 180x300 4th TronXY X3a with a print bed of 220x220x350 Home Made 5th Mega TronXY X1 with a print bed of 440x440x300 6th EX Delta with a print bed of 220x452 7th Mega EX Delta with a print bed of 405x305 8th Corexy 350x350x400 9th Corexy 400x400x400 My latest design the Mega EX Delta, prints faster and quiter then any of myother printers. When i made the Mega TronXY X1 i wanted a larger print bed so i could print my Comic-Con/Cosplay props. Turns out it printed very good, however it tock forever to print large items. so that is when i made the Mega EX Delta. I did a time test with the Mega TronXY X1 and my EX Delta, Same parts same infill same specs on both machines. and the Delta Printed item in 8 hours, The Mega TronXY X1 tock 18 hours. That is when i redesigned my Mega TronXY X1 into the Mega EX Delta printer.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.