Pierścienie do reflektorów Polaris Slingshot Halo

4 (polubienia)
2201 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

Rozpocząłem ten projekt po tym, jak dowiedziałem się, że do działania pierścieni Halo z rynku wtórnego potrzebny będzie oddzielny kontroler 2818. Postanowiłem więc użyć istniejącego kontrolera 5050, którego używam do Transformer Light Up Hood Ornament, który można znaleźć tutaj: https://www.thingiverse.com/thing:4002084 i tutaj: https://www.myminifactory.com/object/3d-print-105857 Będziesz potrzebował 1 rolki 16,5 stopy diod LED 5050 RGD.Transparent Filament. Wersja 60 mm umożliwia dodanie 2 pasków złożonych jeden na drugim, wersja 90 mm umożliwia dodanie pojedynczego paska, a wersja 90 mm v2 umożliwia dodanie 2 pasków złożonych jeden na drugim.

O autorze:
tlmxcpmpp
I just started printing april of 2017. Been a Cosplay peron for alot longer. I got into 3D Printing because i've spent weeks if not months building Comic-Con and Cosplay props. Since i got into 3D Printing i've made, designed and printed all my Comic-Con parts. I use to buy my 3D Printers from eBay. In fact my first 4 were from eBay. 1st TronXY x1 with a print bed of 150x150x150 2nd Tronxy P802a with a print bed of 220x220x300 3rd Kossel Delta with a print bed of 180x300 4th TronXY X3a with a print bed of 220x220x350 Home Made 5th Mega TronXY X1 with a print bed of 440x440x300 6th EX Delta with a print bed of 220x452 7th Mega EX Delta with a print bed of 405x305 8th Corexy 350x350x400 9th Corexy 400x400x400 My latest design the Mega EX Delta, prints faster and quiter then any of myother printers. When i made the Mega TronXY X1 i wanted a larger print bed so i could print my Comic-Con/Cosplay props. Turns out it printed very good, however it tock forever to print large items. so that is when i made the Mega EX Delta. I did a time test with the Mega TronXY X1 and my EX Delta, Same parts same infill same specs on both machines. and the Delta Printed item in 8 hours, The Mega TronXY X1 tock 18 hours. That is when i redesigned my Mega TronXY X1 into the Mega EX Delta printer.

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.