Personalised Christmas Bauble Decoration

12 (likes)
1910 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

Personalise your Christmas tree with these wonderful customizable bauble decorations! Use your slicer's 'pause at height' or 'filament change' feature to create multicolored decorations on a single extruder 3D printer, or why not add a bit of sparkle? This one comes with a bucket load of customizable options! This design is completely free and shared under a permissive license. Your support is hugely appreciated. Did you know? Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects: https://codeandmake.com/premium OpenSCAD Customizer Options This design has the following Customizer options: Text Text - The text Font - The font Other_Font - Enter a font name and select 'Other' (above) to use this font. Font_Size - Font size Letter_Spacing - Letter spacing Text_H_Offset - Horizontal text offset Text_V_Offset - Vertical text offset Text_Rotation - Text Rotation Text_Underline - Add text underline? Text_Underline_Thickness - Thickness of underline Text_Underline_Offset - Underline offset Text_Overline - Add text overline? Text_Overline_Thickness - Thickness of overline Text_Overline_Offset - Overline offset Stars Stars - Number of stars Star_Offset - Star offset Star_Outer_Rotation - Outer rotation of stars Star_Inner_Rotation - Inner rotation of stars Star_Points - Number of star points Star_Outer_Point_Diameter - Outer diameter of star points Star_Inner_Point_Diameter_Percent - Inner diameter of star points as percentage of outer diameter Star_Cutout_Percent - Percentage of star to cut out Bauble Bauble_Diameter - Diameter of bauble Bauble_Thickness - Thickness of bauble material Bauble_Rotation - Rotation of bauble Hanger Hanger_Hole_Diameter - Diameter of the hole Material Material_Thickness - Base material thickness Bauble_Material_Thickness_Offset - Material thickness of bauble relative to MaterialThickness `TextMaterialThicknessOffset- Material thickness of text relative to Material_ThicknessTextUnderlineMaterialThicknessOffset- Material thickness of text underline relative to Material_ThicknessTextOverlineMaterialThicknessOffset- Material thickness of text overline relative to Material_ThicknessStarMaterialThicknessOffset` - Material thickness of stars relative to MaterialThickness Hanger_Material_Thickness_Offset - Material thickness of hanger relative to MaterialThickness Other `PrimingBlock- Add a priming block (for multi-filament prints)PrimingBlockDiameter- Diameter of priming blockPrimingBlockOffsetPercent- Priming block offset as percentage of distance from centerPrimingBlockRotation- Rotation of priming block Custom Font Version 1.1 includes anOther Fontoption, which allows you to use another font from your system. To use a system font: Open the v1.1 (or later) .scad file in OpenSCAD Click Help > Font List, to find the name of the font you'd like to use You can use the 'Copy to Clipboard' button to copy it to the clipboard Paste it into theOther Fonttext box If you used the 'Copy to Clipboard' button, you'll need to remove the double quotes that surround the name Select theOther - Enter font name belowoption from theFontdropdown Multicolor baubles with a single extruder 3D printer If you'd like to print with multiple filaments: Use theMaterialThicknessOffsetsettings to stagger heights. Consider adding aPrimingBlock. The idea is that, at the start of each layer, your printer should print this first. This will help to ensure the filament is flowing nicely after a filament change, before starting to print the bauble in the new filament. You can adjust the size and position of the Priming Block to suit your needs. Don't make it too large though, as you'll be wasting filament. Print using your slicer's 'pause at height'/'filament change' feature, ensuring to switch the filament somewhere between the desired heights. In Cura this can be found under: Extensions > Post Processing > Modify G-Code > Add a script Finishing with glitter You will need: Water-based découpage glue - clear gloss works best A fine brush - one you are happy to use to apply the glue Glitter - fine crafting glitter works best Sheet(s) of paper - to recover any excess glitter (you may need several sheets if you'd like to avoid mixing colors) A container with a small amount of fresh water (for soaking the brush between coats) When customizing your bauble, we recommend using theMaterialThicknessOffsetsettings to stagger heights as this can help when applying the glue. Place your bauble on a sheet of paper Apply glue to the area you'd like to glitter - if working with multiple colors, glue one color at a time Sprinkle a generous amount of glitter on the glued area Collect up any excess glitter by folding the paper and pouring it back into the glitter container If working with multiple colors, repeat steps 1 - 4 until you've applied glitter in all the areas you'd like Leave the brush to soak and wait for the glue to dry Repeat steps 1 - 6 a second or third time until covered to your satisfaction Add a final layer of glue over all the glitter to seal it Wait for the glue to dry and wash the brush well Versions 1.2 (15 Dec 2020) - Fixed typo (Hangar > Hanger) 1.1 (10 Dec 2020) - AddedOther Font` option 1.0 (9 Dec 2020) - Initial version Printing Recommended slicer settings: Resolution: 0.1mm - 0.2mm Infill: 20% - 100% depending how durable you'd like it to be. Supports: No Rafts: No. You may require a brim if you experience adhesion issues. If you also use an inside brim, care will be required to remove it without damaging the stars or letters. Links View on Cults View on Thingiverse License The "Personalised Christmas Bauble Decoration" code (.scad) is licensed under The MIT License by Code and Make. Please note: The CC-BY license has been selected on MyMiniFactory because MyMiniFactory's list of licenses does not include MIT. We are proud to offer content to you absolutely free. We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below: https://codeandmake.com/support We thank you so much for your support!

About the author:
CodeAndMake
We are proud to offer content to you absolutely free. We love to create free content for you. To show your appreciation, please use the link below: https://codeandmake.com/support We thank you so much for your support!

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.