Mentos Gum Dispenser

0 (polubienia)
171 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

This is great for keeping some gum on you wherever you go without having to carry around the entire container. The design protects the gum from debris or dirt until you are ready to use it, so great for tossing into a backpack. It dispenses gum one piece at a time, so you can share easily with friends! Holds eight pieces of gum. To Use: Just press on the flexible button on the side while holding the device upside-down over your hand. The button will move the top cover out of the way while inserting the divider into the stack of gum ensuring only one piece of gum comes out. Occasionally the gum will flip around or get a little stuck. That is nothing that a little shake or tap of the device can't fix.  To Print: I have the device split into two stl. files called gum dispenser 1 and gum dispenser 2. I found that the easiest way to print this with the greatest strength for the spring is to separate the two, and have the one with the button laying flat on the large flat part of the button that will go over the side of the device. then the rest of the chamber can be printed standing up or lying on its side. Supports are necessary when printing, standard or tree should be fine.  Assembly: Once it is finished printing it will be in two pieces. A little bit of superglue is all you need to put the two pieces together. The button can be flexed gently away from the chamber so that it is easier to line up while gluing.

Autor:
AsaFay

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.