Maltronics Malduino Elite Snap Case

2 (likes)
2483 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

This case is designed for the Maltronics Malduino Elite; a BadUSB device that works similarly to Hak5's USB Rubber Ducky. The main physical difference in design is that the Malduino Elite has a DIP switch on the PCB, allowing to use 16 different Ducky Scripts. This case is a "Snap Together" design, in that once the Malduino is indexed in the DIP switch port, simply snap the bottom casing to the top. No screws, nor any adhesive is required for assembly. There is very little wiggle room, around .2mm of clearance in the CAD model, possibly .3mm irl. The port in the rear of the case allows for easy insertion and removal of the needed MicroSD card. The port on the top casing allows for a flush fit of the DIP switch. The case dimensions are: 3.6cm x 2.3cm x .8cm.   Hardware: Maltronics Malduino Elite: https://maltronics.com/collections/malduinos/products/malduino-elite

About the author:
FFFTech
From the Empire State; FFFTechnology is an undertaking to bring common use, open source hardware to the masses. Everything designed has a function, with little care for frill; while using just the right amount of material to get the job done. All designs are tested about a month's time before uploading, so nobody has to feel like a beta tester when they just want a tool that works. You'll find designs from a variety of fields; from domestic usage models like coat hooks, table lamps, and door wedges; to more "specialty" models like the E-Vise Series, Raspberry Pi enclosures, and the IPi Security Camera Series. Everything on this site, my own site, and Prusa Printers are 100% open source. Everything here is free to download and share with others as you see fit.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.