Half Height Dungeon Walls

4 (polubienia)
81 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

USE A UTILITY LIKE UVTOOLS TO REPAIR RESIN TRAPS BEFORE PRINTING. These print best angled "tall" with a bottom corner toward the plate, with medium supports. Two sizes are included: a 1x1 wall and a 2x1 wall. They are stone textured on the front, back, and top, and flat on the (short) sides to allow for flushness when placing them in a row. They are hollowed in the middle to conserve resin. The half-height is to allow players to see their miniatures over the walls instead of having to stand. Presently scaled, they are just short of 25mm to allow a little wiggle room for miniatures. I made these because I didn't like what I was seeing available for download or sale. Hopefully you like these, too! Pictured are items right off the printer and with 2 layers of black wash applied.

Autor:
camnorcross

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.