GPH Zer0 V2

7 (likes)
1485 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

An upgraded version of the original GPH Zer0. Overall, it's design parameters was to be more durable overall, whilst allowing as much (if not more) airflow. List of changes: Top casing's vent grill has been thickened by .9mm Bottom casing's vent grill has been thickened by 2mm The ventilation grill structures has been changed to an interlocking hexagon pattern for increased structural integrity. There is now a spacer plate to go between the Raspberry Pi Zero and the USB Addon Board. The nylon nuts are no longer required. Material has been added below the USB plug to keep it from bending and cracking off the PCB. Screw attachment holes reduced to 2mm. ( M2x12mm Screws will be used) Infill has been increased from 20% to 25%.   Hardware: Raspberry Pi Zero W: https://www.adafruit.com/product/3400 USB A Addon Board: https://www.amazon.com/MakerFocus-Raspberry-Required-Provide-Connector/dp/B077W69CD1?tag=tv-auto-20 MicroSD Card: https://www.amazon.com/Sandisk-Ultra-Micro-UHS-I-Adapter/dp/B073K14CVB/ref=sr13?crid=1QTX1Y34ANTZT&keywords=16gb+micro+sd+card&qid=1558389825&s=gateway&sprefix=16GB+mi%2Caps%2C158&sr=8-3 M2x12mm Screws: https://www.amazon.com/gp/product/B0756VPKGL/ref=ppxyodtbasintitleo00_s00?ie=UTF8&psc=1 Software: Raspbian: https://www.raspberrypi.org/downloads/raspbian/Pi-hole: https://github.com/pi-hole/pi-hole/#one-step-automated-install

About the author:
FFFTech
From the Empire State; FFFTechnology is an undertaking to bring common use, open source hardware to the masses. Everything designed has a function, with little care for frill; while using just the right amount of material to get the job done. All designs are tested about a month's time before uploading, so nobody has to feel like a beta tester when they just want a tool that works. You'll find designs from a variety of fields; from domestic usage models like coat hooks, table lamps, and door wedges; to more "specialty" models like the E-Vise Series, Raspberry Pi enclosures, and the IPi Security Camera Series. Everything on this site, my own site, and Prusa Printers are 100% open source. Everything here is free to download and share with others as you see fit.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.