Elecom Deft Pro Power Switch and Conversion

0 (polubienia)
57 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

A power switch replacement for Elecom Deft Pro trackball mouse with additional angle conversion part if you replace the DIP switch with the top actuated version. Elecom Deft Pro use a side-actuated MSK-23D18 DIP switch from Vimex to toggle between off/low/high power setting. This DIP switch will wear down over time, causing the trackball to occasionally become irresponsive. However, I can't find the exact same switch for sale within my area, so I settle with MSS-23D18 that is the top-actuated version of MSK-23D18, and since the pin position is different, I designed a conversion part that need to be attached on top of the original power switch. Parts: Use MSLA/SLA 3D printer only, since the parts are very small. Assembly: If you need to use the conversion part, you may want to use a power glue to attach the conversion part to the top of the power switch for a more secure fit, but this means you will need to destroy and replace the power switch if you ever need to replace the DIP switch again. Designed by Diystrument 🇮🇩Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of our projects! https://www.instagram.com/diystrument/Please carefully read the licensing section to see the appropriate usage of this design, thank you.

O autorze:
diystrument
DIY 3D printables to customize musical instruments (and other useful stuff). Thingiverse, Cults3D, MyMiniFactory @diystrument

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.