Edit To Fit a Strap and Add Stability

0 (polubienia)
81 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

I changed up the embedded design, and removed a few slots to accomodate a strap. I also created pins to put into the existing retaining pins once you have the retaining nut screwed on. This prevents the retaining pins from bending inward and making the armrest loose. The pins and nuts are the same files as provided by the oriignal creator. THESE ARE VERY LARGE AND NEED TO BE SCALED DOWN TO 10% ORIGINAL SIZE. The retaining nut and pins do not need to be scaled down. This was made to fit a Silvertone banjo, but will work for other banjos.

Autor:
Leafygreens

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.