E3D Hemera Part Cooling Duct

4 (likes)
3813 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

Fan duct for E3D Hemera Hermes, can be mounted on any flat mount plate. Is necessary to make some M3 threads, 2 for the 8mm suds on motor plate and 2 for the BLTouch (for Smart 3.1 BLTouch). The fan is a std 4010 blower fan, the holes on duct for mount are 2mm so you can directly screw up the 4 M2,5 screws. Plate Motor 2x 8mm M3Duct to Plate 2x M3 8mm Studs and 2x M3 8mm screwsFan to Duct 4x M2,5 6mmBLTouch 2x M3 6mm The offsets for the BLTouch Smart 3.1 are, from center of nozzle to front 42mm and to right 3.5mm, Z form nozzle to top 2mm Marlin Configurantion.h #define XPROBEOFFSETFROMEXTRUDER -3 // X offset: -left +right [of the nozzle]#define YPROBEOFFSETFROMEXTRUDER -42 // Y offset: -front +behind [the nozzle]#define ZPROBEOFFSETFROMEXTRUDER -3.6 // Z offset: -below +above the nozzle The support on the Duct can be removed simply by hands There are also step files if you want to remix ;-) Added new remixed file Duct_RMX.st, is 2mm further away from the HeaterBlock and more parallel to bed

About the author:
f3dp
Maker of Things, 3D Printing Addicted, Try Fail Think Retry a well done Thing can always be done Better (Giovanni Agnelli FIAT), Kisslicer lover, Fusion360 rider

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.