Niestandardowy prototyp skrzydła HairClip

1 (polubienia)
157 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

This is a CAD Project for a College Level course at NJIT. Some of the tolerance zones for the mini wings need to be adjusted. Sanding was required for the Tri Wing ends and the Mini Wings. Hot glue was used to connect main components Cad Files Cura Files and G code Are provided in the zip as wellas the STL's Some File Adjustments Were make in the small improvements folder but have not been tested yet Printed Using an Ultimaker 3 ExtendedPLA is used for the Wing Parts PETG is used for the Barrette Hairclip  

Autor:
alexanderhishikawa

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.