Climbing skink

0 (polubienia)
43 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

Printed with PRUSA XL, PLA, 0,6mm Nozzle without support. There are 2 screws: one holds the hind legs plus tail. This is an old screw from computer housings. And there is a M3 screw with at least 20mm thread. The cam was modified as to hold a M3 nut. The M3 screw is forced self-tapping through the pulley. The nuts seen on the 3rd picture are not necessary. The pulley was modified as to be printed in one piece without support.

Autor:
Antherea

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.