3.175mm (0.125") Ball Slewing Bearing

2 (likes)
1684 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

3.175mm (0.125") Ball Slewing bearing intended for glue in place mounting. Slewing bearings are designed to support heavy but slow/oscillating loads. Greater capacity when loaded in compression. The inner/outer race surfaces are cleared in assembly by 0.3mm and do not interfere when mounted. This was designed in response to something smaller and smoother than the 4.5mm (BB) Slewing bearing I posted: https://www.thingiverse.com/thing:3122634 Applying lithium grease greatly reduces rolling friction. Inner and outer race can be printed at the same time by flipping one 180° so the large flat face is on the print bed. Larger diameters need external support to maintain roundness. Diameters posted are just random assortment. If there are requests I'll gladly post them. Fitment Height = 4mm typicalID = Diameter - 8mmOD = Diamter + 8mmBB count = ~Diameter +/-https://www.mcmaster.com/96455K49 https://www.mcmaster.com/9614k52 Regards,

Author:
DesignCell

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.