19-inch rack mount for Unifi PoE (U-POE 30W and U-POE-50-60W)

0 (polubienia)
12 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

Print two pieces (mix and match you can print 2 of the same or one each), attach the pieces with M6 bolt+nut and you have your 19" rack bracket for 6 of your POE+ adapters I print it with PETG and 0.8mm nozzle with 0.5mm layer height for high speed print. It can of course be printed with smaller nozzle and smaller layer height it will just take longer to print (and will look prettier). combo fan version allow you to click in 40x40x28mm server fan, e.g. ARCTIC S4028-15k and if you use this one printing with .2 or .25mm layer might be better at least for first 10mm then you can go to fatter layers so that ridge that grabs the fan is printed nicely On-Shape link for the source if you want to make changes yourself: https://cad.onshape.com/documents/3cfc022c82f9de5859b3a9b1/w/411f0b7e5bfaaed83578a61a/e/abb874b8cabade6ee10e8f77?renderMode=0&uiState=67703cf19d35ee29995fe1ef

O autorze:
BogdanKecman
Software Engineer (MySQL Cluster specialist, High Availability and High Reliability systems consultant, Security consultant, System Architecture consultant.. currently employed by Oracle) Electronics Engineer (microelectronics, impulse/digital design, power design ...) RepRap Core memeber since March 2nd 2010. ex thingiverse account: https://www.thingiverse.com/BogdanKecman/about

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.