Polaris Slingshot Roll Cage Cargo Rack Mounting

0 (likes)
3133 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

This is my version of the Roll Cage Roof Rack Mounting system.I looked up to see if they made a Polaris Slingshot Roof Rack and turns out they Did.However i didn't want to pay their prices so i made my own.There are several Variations of this mount and you can use which ever one you like.I went with the V7 one at 50% infill at .2mm layer, plus you will need 12 2.5 inch 5/16 Self locking Nuts and Bolts along with washers.I also used 1 inch PVC pipe for the cross members and some 20mil Plumbers tape so i would scratch the paint.The other versions simply just slip on with a little force.As you can see in the Pictures it worked out very Well. I just Added V8 Front Mounts and Rear Mounts, These have larger top holes for the PVC pipe to slide in . Don't worry about the front pipes if they slip out, That is what the washers will do to keep them in place.Also V8 Has 1mm Support braces so there will be no need to add support during printing. 

About the author:
tlmxcpmpp
I just started printing april of 2017. Been a Cosplay peron for alot longer. I got into 3D Printing because i've spent weeks if not months building Comic-Con and Cosplay props. Since i got into 3D Printing i've made, designed and printed all my Comic-Con parts. I use to buy my 3D Printers from eBay. In fact my first 4 were from eBay. 1st TronXY x1 with a print bed of 150x150x150 2nd Tronxy P802a with a print bed of 220x220x300 3rd Kossel Delta with a print bed of 180x300 4th TronXY X3a with a print bed of 220x220x350 Home Made 5th Mega TronXY X1 with a print bed of 440x440x300 6th EX Delta with a print bed of 220x452 7th Mega EX Delta with a print bed of 405x305 8th Corexy 350x350x400 9th Corexy 400x400x400 My latest design the Mega EX Delta, prints faster and quiter then any of myother printers. When i made the Mega TronXY X1 i wanted a larger print bed so i could print my Comic-Con/Cosplay props. Turns out it printed very good, however it tock forever to print large items. so that is when i made the Mega EX Delta. I did a time test with the Mega TronXY X1 and my EX Delta, Same parts same infill same specs on both machines. and the Delta Printed item in 8 hours, The Mega TronXY X1 tock 18 hours. That is when i redesigned my Mega TronXY X1 into the Mega EX Delta printer.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.