Foldable Terrain - Test Files

5 (polubienia)
1980 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

Test print the patented double hinge mechanism for your foldable Warhammer terrain! You won't find em' anywhere else! This newest version includes all the released factions! Ready to print in both monocolor and multicolor in case you want to make sure your printer can print the double hinge mechanism. Bambulab files included. To print the monocolor version disable the purge tower, keep the rest of the profile intact. ⚠️ This is a callibration file for the Foldable terrain Campaing that features foldable terrain for Warhammer 40k in the WTC competitive format: https://www.myminifactory.com/campaigns/foldable-2024-wtc-terrain-set-for-40k-secutor-tactics-2487 ⚠️ If you are printing a one color piece, print only the MONOCOLOR version. If you want to print the two-colored version, include both COLOR1 and COLOR2 files in the slicing software of your choice. If you are printing on a Bambulab Printer, you can use the Bambu Studio files. To ensure the best possible results, we recommend the following print settings: Layer Height: 0.3mm for standard printing, with a minimum of 0.12mm for finer details. Note: Lowering layer height below 0.12mm significantly increases print times (specially for multicolor prints) and is not recommended. Printer Model: Bambu Lab P1PSlicer: Bambu Studio SlicerNozzle Size: 0.4mm Print Speeds:First Layer Speed: 50 mm/sOuter Wall Speed: 200 mm/sInner Wall Speed: 300 mm/sTop Surface Speed: 50 mm/sOverhang Speed: 50 mm/s Supports: DisabledBrim: DisabledInfill: 5% (Gyroid), ensuring lightweight yet sturdy terrain pieces.Flushing Volumes Multiplier: 0.35 for multicolor prints. Please adhere to these settings for optimal print quality. Deviating significantly from these recommendations may result in less than satisfactory prints. If you have any quality issue or misprints of any kind, try to increase the wall count from 2 to 3 first and see if that solves the issue.

O autorze:
TinkerJunkie
Love me 3d printer, love me 3d modeling software, love me wargames, simple as

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.