Low-Poly Chikorita

127 (polubienia)
5812 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

Designing a low-poly Pokemon is the best way I found to represent the poor graphic quality the first Pokemon games had. So, here I present you the low-poly Chikorita, which is part of the Low-Poly project I'm developing. This model is 5cm tall approximately. The model from the picture was printed with a Prusa i3, 0.2mm layer height, 0.5mm nozzle, 45mm/s speed and a cooling fan (I really recommend this!). The material is 3mm high quality PLA.) It was designed so it doesn't need support material, although each printer is different and it may be more difficult to print it depending on the settings. The Chikorita model has two parts. I decided to split it because it made it possible to design a more complex Pokemon with better printing results, and also to allow people to combine two different filaments. You can download the complete file (which includes both body and leaf) or each part separately in case you want to print each part with a different filament.

Autor:
flowalistik

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.