Brown Pit Bull Hueforge 3D Printed Texture Ar

0 (polubienia)
11 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

Hi Everyone! We have reached 50 posts on Patreon! You Only see 10% here. Link in Bio. We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer). The Second version is just the STL, the information will be below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 182.28x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Brown At layer #13 (1.12mm) swap to Latte Brown At layer #18 (1.52mm) swap to Jade White for the rest

O autorze:
Denusa3D
Love What You See? Support Our Creative Journey! Subscribe To Our Patreon Page For Full Access To Our Library Of Models! You Only See 10% Here On Makerworld! https://www.patreon.com/DENUSA

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.