RadioPi Zer0

10 (likes)
2103 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

To put simply, the RadioPi Zer0 is a USB A Addon Board V1.1 attached to a Raspberry Pi Zero W with the main purpose of radio transmission. This can be used as a music player, a small SOS beacon, etc. This device can be plugged into any power supply with a USB port, be it a wall adapter, portable power supply, etc. All I/O ports are accessible, allowing for wired programming without disassembly. There are many tutorials for programming the Raspberry Pi for radio transmission online Due to it's compact design, along with being able to have a portable power supply, the RadioPi Zer0 is highly mobile and versatile.   Antenna Installation Strip 4-5mm of insulation from a 12cm long 18 AWG wire. Solder the wire to gpio pin 7. Bend the antenna around the MicroSD card slot and pass it through the antenna port.Hardware Hardware: Raspberry Pi Zero W: https://www.adafruit.com/product/3400 USB A Addon Board: https://www.amazon.com/MakerFocus-Raspberry-Required-Provide-Connector/dp/B077W69CD1 MicroSD Card: https://www.amazon.com/Sandisk-Ultra-Micro-UHS-I-Adapter/dp/B073K14CVB/ref=sr13?crid=1QTX1Y34ANTZT&keywords=16gb+micro+sd+card&qid=1558389825&s=gateway&sprefix=16GB+mi%2Caps%2C158&sr=8-3 18 AWG Wire: https://www.amazon.com/Ancor-Marine-Grade-Primary-Battery/dp/B000NUYGJI/ref=sr17?crid=3CM2914Z3YPF5&keywords=18%2Bawg%2Bwire&qid=1558389936&s=gateway&sprefix=18AWG%2BWir%2Caps%2C157&sr=8-7&th=1 M2.5 x 12 Screws: https://www.amazon.com/uxcell-M2-5x12mm-Thread-Button-Socket/dp/B01AXUSWEM/ref=sr15?keywords=m2.5+x+12&qid=1558389749&s=gateway&sr=8-5Software Raspbian Stretch: https://www.raspberrypi.org/downloads/raspbian/ PiFM: git clone https://github.com/rm-hull/pifm MPG123: sudo apt-get install mpg123

About the author:
FFFTech
From the Empire State; FFFTechnology is an undertaking to bring common use, open source hardware to the masses. Everything designed has a function, with little care for frill; while using just the right amount of material to get the job done. All designs are tested about a month's time before uploading, so nobody has to feel like a beta tester when they just want a tool that works. You'll find designs from a variety of fields; from domestic usage models like coat hooks, table lamps, and door wedges; to more "specialty" models like the E-Vise Series, Raspberry Pi enclosures, and the IPi Security Camera Series. Everything on this site, my own site, and Prusa Printers are 100% open source. Everything here is free to download and share with others as you see fit.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.