Bigbore Shocks Tunning

11 (likes)
1911 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

These are Cup Spring options to use small springs on Traxxas Bigbore shocks. Also, the spacer can be use to tune the shock to reduce shock travel in compression or strech. To reduce compression: can add spacers outside of the shock, on the pinion. To reduce stretch: add spacers inside the shock by removing the pinion and adding spacers before the pinion ring. Spacers will not be visible, as they will stay inside the shock housing reducing full stretch. The spacer is 1mm in width, but you can print by stretching them to any length you want. For example, in the picture, I printed 10mm, 12mm, and 14mm to use in my front shock to reduce stretch to keep the front of the rig low.

About the author:
danielanguita
For 8+ years I've been in the RC and Drones hobby and mostly dedicated to RC Crawlers. In 2021 I started learning 3D printing and learning to design shapes in 3D as a new hobby, which I'm loving so far! I've discovered myself as an inventor/designer/craftsman of these electronic machines more than a driver, and I deeply enjoy squishing performance out of my designs and ideas.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.