Santa Globe

77 (likes)
3506 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

I created a santa globe in a lithophane. This does not need supports. I used a raft and that was it. Up to you if you want a raft,Brim or none  I loved how it turned out and thought i would share for others to make but not sell them. Santa Globe is the original one in photo's and the Santa Claus Globe is same but a different base. I printed up the Santa Globe. I hope you enjoy the print.  Update- Settings to print this up. Printed with a 0.4mm nozzle, 0.1 layer height, 99-100% infill, Print speed 30 to 45mm/s. Build plate adhesion can be none/brim/raft and please don't add supports or you will have a hard time removing them from inside the globe. Select Super Quality :).

About the author:
Roxyfrog
I have been printing for awhile and thought it was time to share my designs. I am into making lithophane. Stay tuned in for more designs to come.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.