Airsoft Shooting Swinging Target

30 (likes)
4288 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

My son wanted a swinging target to shoot with his airsoft and BB Gun. I created this target stand and swinging targets. It has room for 3 Targets, 2 big 1 small. I've modified the design from the first version to include the following:     •  Cross bar has groove on the bottom to insert into side   supportsfor added stability        ◦ thicker target hangers (1 snapped when removing it from bed)        ◦ Blocks on bottom of Side supports to reduce Horizontal movement Instructions 1) Print the Parts Print out two of the "supports". I added a block on the bottom of each to prevent horizontal movement of the stand. Print out the "Cross Bar" with supports as you will need it because of the rounded sections. Print out a set of the targets. You will also need to print it with supports. 2) Snap together the parts Remove the support material from the targets Snap the targets onto the cross bar Insert the cross bar into the square holes on the supports align the groove on the bottom of the cross bar with the supports and press down to lock in place.

About the author:
dehart007
I have been 3D printing for about 6 years now and have multiple 3D printers. I also have an industrial 150w Laser cutter engraver as well as 3 other lasers. I do all my own designs and I am active on multiple 3D design websites. My designs have been featured on various websites. I hope you enjoy what I make.. :-)

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.