The YABA

1 (likes)
3868 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

YABA is an abbreviation for "Yet Another Blower Adapter" This is an update or a revised creation based on some of my previous adapters. It's a swap in mod for the stock 40mm cooling fans on printers like the wanhao duplicator i3s. This takes a 50X50X15 blower fan. These fans are common place when it comes to being used for part coolers on these printers. Browse the pictures to see how it installs, the hardware, and how it looks on the actual printer when homed. HardwareThis mod does require some hardware, this includes a fan along with a screw and nut to firmly attach the fan onto the part. I made this mod use the stock screws that firmly attach the stock fan to the heat-sink. You can find a wide variety of 5015 fans on various online shopping sites, however you should always check to see if you are running 12 or 24 volts. 1 5015 blower fan1 M4 by 20mm long screw1 M4 nut The diverters mearly force the air out the back of the heatsink. If having the air exit the front bothers you, than feel free to use them. Otherwise it's not really needed. 

About the author:
FilamentCorner
I am merely a simple maker sharing my designs and ideas with anyone willing to make them.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.