Filabracket (storage system)

353 (likes)
15973 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

This is my concept of a Filament storage shelf.I used 12 mm steel rods for the connection between the brackets, but you can also use wood or aluminium pipes. Maybe it will bend a bit in the middle in this case i also created an bracket to support the middle. You shoud print this in ABS oder PETG. I didn´t tryed it in PLAI printed it with a 0.4 nozzle with 4 perimeters for stability. Do not use less then 25% infill (triangular or honeycomb).I used 25% and it works fine You maybe need a brim. I desiged the parts to fit well on a 20 x 20 cm Printbed. The size of the holes is 12.2 mm diameter you should need about 100 gramms each part. I also added some simple screw coverplates :-) Have fun with it and share your pictures with us!

Author:
Link83

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.