Anti vibration pads (customizable)

5 (likes)
2482 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

Anti-vibration pads for things-that-make-noise. Designed to reduce vibrations traveling from things, into the surface they are on. Print with some flexible filament like filaflex etc. use double sided tape to fix to device, triangles pointing down. 2mm triangle width and 4mm height are a good starting point. Try different geometries if you want. You can customize to make them in the size you need, or change the geometry in the .scad file.The width is rounded down to fit the triangles on the surface, meaning if you put triangle base width at 2mm ,extrusion width (flat top) at 0.4mm, and overall width at 50x50mm, your resulting pad will be 50x48mm, because 2+0.4 = 2.4 and 50 / 2.4 = 20.8. So the surface will be rounded down to fit 20 triangles -> 2.4 x 20 = 48 (sorry for the photos, mt camera is unable to shoot black rubber)

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.