Uchwyt na wizytówki Slider

96 (polubienia)
12138 (odsłony)
Ten produkt jest dostępny tylko jeśli posiadasz konto w serwisie My Mini Factory
×
Kolor:

2 part sliding business card holder. Print support free and with no raft. Design supplied in both SLT and OBJ formats so you can add your own customisation if you want; logos/artworks should be placed as indent 0,6mm deep, and almost anything can be illustrated on the box lid as long as the depth of 0,6mm is used and open spaces are kept small. Also supplied in 2 scales, one for business cards sized 49x87mm, and the other for cards measuring 85 x 55mm (UK standard size). You can also scale the design to match your needs, using your favourite CAD or slicing software. Extra details 2 protruding surfaces on each end make for easy opening The oval in the base allows to push the cards up for easy removal The small bar in the top limits the opening so the box stays together Note - a light sanding with a fine wet and dry paper on the sliding surfaces make the box open and close very smoothly.

O autorze:
meeee
Free Lance design engineer, studied in Oxford, worked for Oxford university before moving to France in1992. Work exclusively in3D print designs, and adaptation of existing parts, for example test rigs, although the rig itself does not change, adaptation is needed to accommodate the new part tested. 3D printing is ideal and with new filaments printed parts are becoming strong and more ware resistant every day.

Opinie

Ten model nie ma recenzji. Chcesz być pierwszym recenzentem? Najpierw musisz wydrukować model.