Cantilever Suspension for Axial SCX10

185 (likes)
17886 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a couple nuts and bolts. But overall cost is really inexpensive. Plus if anything breaks you can always print a new part! Here is a list of parts that are needed to complete this project. Printed Parts:1 x Base1 x Mount Left - Glue to "Base" part1 x Mount Right - Glue to "Base" part2 x Pivot 12 x Pivot 22 x Spacer 12 x Spacer 2 Bought Parts:2 x M3 40mm bolt2 x M3 nut4 x M2 16mm bolt4 x M2 nut(you can use M3 bolts and nuts instead of M2, you just need to drill the holes a little bigger) Bought or made Part:2 x Push rods 28mm long from center of ball joint to center of ball joint--- For the Push rod (the connection between the cantilever itself to the axle), I used the extra rod ends that you get when you buy a SCX10

About the author:
RMTCTRL
I work in the Video game industry, and have always loved designing things and making things. I have gotten into the RC world in the last couple years and love making scale items and parts! I have wanted a 3D printer for a long time and finally have one to make things with!

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.