Wallmount for Longboards

485 (likes)
12779 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

This wall mount for longboards was designed so your longboard wheels won't touch the wall when the board is hanging. You can hang your board with the deck side towards the wall so the wheels point into the room and the bottom of your deck is visible. You will need to print the file two times so you have one hanger for each of the front wheels. The file has to be printed with some minimal support so the screw slots print nicely. Once you have printed the hangers you have to screw 4 screws into the wall so you can slide on the hanger. Screw them in such a way that there is 2mm between the head and the wall and the holder should slide in with some resistance.

About the author:
Frisovdijk
Architecture student from the Netherlands. Got into 3D printing as a cheaper means to manufacture architectural models and details for presentation purposes. I did branch out to designing the things I need in my day to day life. In my opinion 3D printing can make life much easier and cleaner. I strive to design in functionalistic manner and to derive form from function.

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.