Tablet / Phone Stand

479 (likes)
19072 (views)
This product is available only if you have an account in My Mini Factory service
×
Color:

This Tablet / Phone stand is a super simple stylish design. The stand was designed to be as small as possible, so it is quick and easy to print as well as not consuming a lot of filament, but adequate to hold most tablets and phones in either orientation. You can use a tablet or phone in the stand however if it slides around too much on hard surfaces (as plastic can) the base / footprint could easily have thin foam rubber padding added to make it non-slip. Seven files have been provided to accommodate devices from <7mm thick up to 13mm thick. Just measure the thickness of your tablet or phone and print the file of the next size up..... so a tablet measuring 8.25mm is best in the 9mm stand. This ensures a snug fit. It's easy... but please remember clearance is required so a 10mm thick device will not fit a 10mm stand... print the 11mm stand. The Tablet / Phone Stand should work well for most tablets and phones provided the correct file is used for a snug fit. This is a super easy print. Print them in your favourite color/s (pause and change colours part way through if you want to get creative) and great as a small gift. Please refer to the print settings and images for additional information... and please post images of your stand/s in use for others to see. Note: If you like this check out the rest of my practical and fun designs.

About the author:
muzz64
Designer of all sorts of fun and practical things!

Reviews

This model have no reviews. Would you like to be the first to review? You need to print it first.