Mark 85 Bust - Iron Man
Here's a bust i made a little while ago... Iron Man's Mark 85 armor inspired by Avengers: Endgame. Should be an easy print, minimal support are required for the head and the shouldrs on the chest. I originally printed the Base and Chest at 0.2mm layer height and the Helmet at 0.1 mm, that all took about 7 - 10hrs if i remember correctly. Update 1 (13/12): The files that i had uploaded was on the wrong scale, it should be printed at 10000% to actually be 15cm in height, so i fixed that, now the shall be 15cm at 100%, but i also reoriented the Helmet and Chest for the correct orientation for FDM printing.